Can resin bound be used for a patio as well as a driveway?

Yes. The system is the same, laid slightly thinner for pedestrian areas, and it suits gardens particularly well because it follows curves and has no joints to weed.

Is a resin patio slippery?

The exposed aggregate texture provides good grip. As with any surface, algae on a shaded terrace will make it slippery over time, so an annual wash keeps it as it should be.

Can resin be laid over an existing concrete patio?

If the concrete is sound, level and free of movement, it makes an excellent base once cleaned and prepared. Cracked or lifting concrete needs addressing first, or the cracks will reflect through.

What happens where the patio meets the lawn?

We build a proper edge restraint — brick, block or metal trim — so the resin has something to finish against and the grass cannot grow over the edge.

How long does a resin patio last?

Fifteen to twenty years on a sound base. UV-stable resin is worth specifying in a garden where the surface is in view all summer.

Patios

Resin Patios in Haslemere

A seamless, permeable garden surface that flows around curves, steps and planting without a single joint or cut slab.

Get a free quote 07457 401675

Resin bound is not only a driveway material. In a garden it solves problems slabs cannot: awkward curved shapes, paths that change width, level thresholds into a garden room, and terraces where nobody wants to weed a joint again.

Where a resin patio works best

Because the material is trowelled rather than laid in units, it follows any shape. Curved terraces, sweeping paths, circular seating areas and the transitions between them are simple in resin and expensive in stone.

It also gives a completely flush, trip-free surface, which makes it a strong choice around garden rooms, level-access doorways and family gardens where children are running about.

Seamless — no joints, no weeds, nothing to rock or lift
Fully permeable, so rainfall drains straight through
Follows curves and irregular shapes without cutting
Smooth and flush for level access and wheeled use

Resin bound patio installed in a Haslemere garden

Aggregates and colour in a garden setting

Garden resin usually reads better in softer, more natural blends than the sharp greys often chosen for driveways. Warm gravel and autumn blends sit comfortably against planting; pale quartz brightens an enclosed courtyard; darker blends recede and let the garden take the attention.

Aggregate size is normally 1–3mm for a fine, comfortable texture underfoot. We bring sample boards and look at them in your garden, in daylight and wet.

Base, edging and permeability

Resin needs a rigid base. In a garden that usually means a new permeable base course over a clean-stone sub-base, or a sound existing concrete slab. We excavate 150–200mm for a pedestrian area, membrane the formation and compact in layers.

Edges matter more in a garden than on a drive because resin abuts soft landscaping. We form a restraint — a block or brick edge, aluminium trim or a low retaining course — so the surface has something to finish against and the lawn cannot creep over it.

Because the whole build-up drains, water goes into the ground rather than to a gully. On heavy clay we still design a soakaway or connect to existing garden drainage so the sub-base never sits saturated.

Installation and curing

The surface is mixed on site in measured batches and trowelled at 15–18mm, each batch worked into the last so the finish is continuous. It has to be dry and above about 5°C, so we schedule around the weather rather than push on.

Most garden areas are trowelled in a day and are walkable within about six hours, with furniture back on after 24 hours.

Maintenance and repair

A brush and an occasional rinse. Keep leaf litter off it in autumn so the pores stay open — that is the one thing that matters in a garden setting, where there is usually more organic debris than on a drive.

Damaged or stained areas can be cut out and re-trowelled. Colour matching against weathered material is close but not guaranteed, so we always keep the detail of your blend on file.

Recent work

Resin Patios projects across Haslemere & Surrey

Work completed across Haslemere, Hindhead, Beacon Hill, Grayshott, Shottermill, Chiddingfold, Fernhurst, Liphook, Milford, Witley, Godalming and the surrounding Surrey villages.